test couplers for bulkhead mounting

 
innesti_passaparete_2.gif

Bulk head type with P-CHECK hose connection ends on both sides (with central sealing and threaded connection M 16 x 2 ). One end is fitted with the test-coupler, for use with a fixed or a sporadic connection.

The second end is provided with the same connection but without the coupler valve, for use with a fixed test-hose type “A”.
Denomination: AKT –AK 
Weight: 95 kg / 1.000 pieces 

 
innesti_passaparete_1.gif

Bulk head coupler with the complete P-CHECK test coupler                ( M 16 x 2 ) on one side and 24° internal taper connection according DIN 2353 on the other side, for nominal tube size 8 and 10 mm. The connection size 8 mm is suitable, at choice, for a test-hose “D”          ( M 16x 1.5 ) or for use with steel tubing.

The standard version of the bulkhead couplers are supplied complete with cutting ring and fitting nut.

_____________________________________________________                               

                                         bulkhead couplers 

_____________________________________________________

 article              NW      M          L    L1  CH S-max      weight

                                       _____________________      Kg / 1000

                                                        mm

_____________________________________________________    

                                                   

AKS 08 SE           8       16 x 1,5  63  40  22   8              120

AKS 10 SE         10       18 x 1,5  65  41  24 10              146